How to use the Bathmate Hydropump
How to use the Bathmate Hydropump
1) Fill the bath with water.
2) Once you're in the bath, put the Bathmate underwater until it completely fills with water, then while it's underwater put your penis inside it.
3) Push the bathmate down towards the pelvis base several times until you've created a vacuum. You should start to feel the pressure building up. Surplus water starts to be replaced from the pressure release valve at the top of the Bathmate. You may have to pump it down four of five times until no more water comes out of the pressure release valve.
4) Once you cannot pump any further, just relax for five minutes. Whenever you cannot pump the Bathmate further this is the optimum vacuum at that particular time.
5) Every four or five minutes try pumping down again. As your penis is expanding this will force excess water from the top of the Bathmate every time you pump down. But you will always reach a point where you cannot pump further.
6) Pump the Bathmate to its optimum vacuum, when you feel it's necessary. This is the stage where no more water comes out at the end, when you try pumping down.
7) If you feel the pressure is too much, just lightly activate the pressure release at the top of the Bathmate. This will release pressure. After 15 minutes, release the pressure by pressing the pressure release at the top of the Bathmate and take the unit off. Then stand up so you can see the results right away. You won't be disappointed.
8) We recommend 15 minutes per session. Use the unit as often as once a day, but no less than three times a week for best results.
